Executive Summary: The Hidden Value Pool in Footwear Bonding
A shoe is held together by a layer of adhesive that costs very little per pair but can cost a great deal when it fails. Delamination, poor flex performance or hydrolysis failures lead to rework, scrap and returns. NextMSC’s framework for this page is: value pool = footwear output × adhesive intensity × price per kg, plus the service that keeps the bond line reliable.
The production base is concentrated in Asia. APICCAPS’ World Footwear Yearbook 2025 puts global output at 23.9 billion pairs in 2024, up 6.9%, with Asia producing 88% and accounting for 85.1% of export volume. Vietnam exported 1,583 million pairs (10.7% of the world), Indonesia 601 million (4.1%) and Cambodia 207 million (1.4%).
Trade data give a price proxy, not a footwear price. No public customs code isolates shoe-grade adhesives, so this page uses HS 350691 (adhesives based on rubber or plastics, including artificial resins). In 2024 the five markets with data imported $339.55 million of it on 118.97 million kg, a weighted average of $2.85 per kg, with country values from $2.15 (Cambodia) to $3.78 (Philippines).
Compliance is a second driver. The EU Ecolabel for footwear limits total VOC use in final production to 18 g per pair on average (20 g for protective footwear), and its footwear criteria are valid until 31 December 2028. That is a voluntary label covering all VOC sources, not an adhesive-only limit, but it shows the direction of buyer scrutiny.
NextMSC Insight: at an assumed 20 g of adhesive per pair, the $2.85-per-kg benchmark equals about $0.057 per pair, or 0.4% of Vietnam’s implied export value of $14.68 per pair. The cost is small, which is why suppliers compete on performance and service rather than on price per kg. The grams per pair are an assumption, not measured consumption, and public data do not establish a footwear adhesive market size.
Dated Reference Points
The sources behind the macro indicators were published between January 2025 and January 2026. The dates show how current each figure is.
3 January 2025 — LEFASO sector profile
Vietnam’s leather and footwear association describes about 1.3 billion pairs of annual production, more than 1,000 factories and about 1.5 million workers.
24 January 2025 — Vietnam’s 2024 exports
Viet Nam Government Portal reports $23.24 billion of footwear exports in 2024, up 13.16%, within $27.04 billion for leather and footwear.
19 August 2025 — APICCAPS yearbook release
APICCAPS reports Asia at 85.1% of 2024 export volume and global exports of nearly $170 billion.
5 September 2025 — Better Work Cambodia report
Better Work reports over 918,000 workers in Cambodia’s garment, footwear and travel goods sector in 2024.
10 December 2025 — ILO on Indonesia
ILO cites around 960,000 direct and up to 1.3 million indirect footwear workers in Indonesia.
23 December 2025 — EU Ecolabel extension
An amendment extends the validity of the EU Ecolabel footwear criteria to 31 December 2028.
17 January 2026 — Cambodia’s 2025 exports
Cambodia’s news agency reports $15.7 billion of garment, footwear and travel goods exports in 2025, up 15.8%.
29 January 2026 — Vietnam’s 2025 exports
VOV reports footwear exports above $24 billion in 2025, up 5.8%, within nearly $29 billion for leather and footwear.
2026 Footwear Adhesive Benchmark Index
The index separates three kinds of evidence: the manufacturing base, the import-price proxy and the compliance backdrop. They answer different questions and should not be added together.
MANUFACTURING BASE: APICCAPS
Output — Asia makes almost nine in ten pairs
23.9B
Global pairs produced, 2024
88%
Asia share of production
85.1%
Asia share of export volume
Global export volume rose 4.6% in 2024 and export value approached $170 billion. China holds 62.2% of export volume (9,203 million pairs), followed by Vietnam at 10.7%, Indonesia at 4.1%, India at 1.8% and Cambodia at 1.4%.
WORKFORCE AND EXPORTS: NATIONAL SOURCES
Countries — scale differs, definitions differ
$24B+
Vietnam footwear exports, 2025
~960,000
Indonesia direct footwear workers
$15.7B
Cambodia garment, footwear and travel goods exports, 2025
Vietnam’s figure is footwear-only. Cambodia’s is a combined category that includes garments, and another outlet reports $15.5 billion for the same year. Indonesia’s workforce figure comes from an ILO article that does not state a reference year.
PRICE PROXY: WORLD BANK WITS, HS 350691
Price — about $2 to $4.6 per kg
$2.15
Cambodia, 2024
$2.85
Weighted five-market average, 2024
$4.57
Vietnam, 2023
Unit value is import value divided by quantity. HS 350691 includes adhesives used outside footwear, and the values are customs averages, not supplier quotations. Vietnam’s row is for 2023 because WITS shows no 2024 imports for the code.
Figure 1. Asia’s Position in Global Footwear, 2024, Share of World Total
Percent of global total by volume; APICCAPS World Footwear Yearbook 2025.
Source: APICCAPS and NextMSC analysis.
nextmsc.com/industry-deep-dive/specialty-adhesives-footwear-southeast-asia-2026
These indicators describe the manufacturing ecosystem in which adhesives, primers, cleaners and surface treatments are bought. They are not a measure of adhesive consumption.
The Price Spectrum: What Adhesive Imports Cost
Import unit values vary by about a factor of two across the region. The differences reflect product mix, shipment size, supplier origin and customs valuation as much as any difference in price for the same product.
Figure 2. Adhesive Import Unit Value by Market, HS 350691, US Dollars per Kilogram
2024 data except Vietnam* (2023). Import value divided by reported quantity.
Source: World Bank WITS (UN Comtrade) and NextMSC analysis.
nextmsc.com/industry-deep-dive/specialty-adhesives-footwear-southeast-asia-2026
| Market | Data year | Import value | Quantity | Unit value |
|---|---|---|---|---|
| Cambodia | 2024 | $16.95M | 7.86M kg | $2.15/kg |
| Indonesia | 2024 | $111.74M | 42.00M kg | $2.66/kg |
| Thailand | 2024 | $79.13M | 29.62M kg | $2.67/kg |
| Malaysia | 2024 | $89.50M | 28.32M kg | $3.16/kg |
| Philippines | 2024 | $42.23M | 11.17M kg | $3.78/kg |
| Vietnam | 2023 | $225.15M | 49.26M kg | $4.57/kg |
Indonesia is the largest 2024 importer of the five, with 32.9% of the combined value (NextMSC calculation). The 2024 five-market total of $339.55 million and 118.97 million kg gives the $2.85 weighted average, which excludes Vietnam because its row is for 2023.
Figure 3. China-Origin Share of HS 350691 Imports by Value, Percent
China as a share of each market’s import value; WITS partner data. NextMSC calculation.
Source: World Bank WITS (UN Comtrade) and NextMSC analysis.
nextmsc.com/industry-deep-dive/specialty-adhesives-footwear-southeast-asia-2026
China supplied 78.9% of Cambodia’s imports by value, 54.8% of Vietnam’s (2023) and 51.2% of Malaysia’s. China-origin shipments were priced at about $2.00 per kg into Cambodia and $2.40 per kg into Malaysia, below those countries’ averages of $2.15 and $3.16 (NextMSC calculation). The gap suggests that higher-value products arrive from other origins.
The 4 Pillars of the Footwear Adhesive Opportunity
NextMSC’s assessment separates what drives adhesive need, what makes it productive, what regulation adds and what keeps a supplier in place.
PILLAR 1
Materials — More Substrate Pairs, More Chemistries
Modern footwear combines rubber, EVA, polyurethane, textiles and synthetic leather, each with different surface energy, porosity and flexibility. Adhesive selection depends on the substrate pair, the construction, process temperature, open time and end-use conditions, so no single chemistry fits every shoe.
Henkel’s sports shoe literature names four families: reactive polyurethane (PUR) hot melts, water-based adhesives, one-side adhesives and two-in-one adhesives that remove a separate primer. These are vendor descriptions and should be validated in each factory.
PILLAR 2
Productivity — Fewer Steps, Fewer Failures
Henkel states that PUR hot melts reduce production steps and lower labor and energy use, and that a one-side adhesive increased production by 21% per hour in its example. Both are manufacturer claims, not independent measurements, and they should be tested in the customer’s own line before entering an investment case.
The economic logic is that the adhesive is a small input, so even a modest reduction in rework or line time can outweigh a higher price per kilogram.
PILLAR 3
Compliance — VOC Scrutiny Is Rising
The EU Ecolabel for footwear limits total VOC use in final production to 18 g per pair on average, and 20 g for protective footwear. The criteria are valid until 31 December 2028 after an amendment of 23 December 2025, and a revision is ongoing.
The limit is voluntary and covers all VOC sources in final production, so adhesives are only one contributor. It still signals why water-based and lower-emission systems matter to brand-driven factories.
PILLAR 4
Service — Qualification Makes Suppliers Sticky
Changing an adhesive usually requires line trials, bond testing and customer approval, so conversion from an incumbent supplier is a technical decision as well as a commercial one. Local application support, substrate preparation guidance and consistent batch quality can therefore matter as much as the price per kilogram.
Where factories import adhesives from distant origins, reliable supply and landed cost become additional differentiators.
Adhesive Cost per Pair: Sensitivity Matrix
The matrix shows what an assumed adhesive quantity costs per pair at three published import unit values. It is NextMSC illustrative arithmetic: the grams per pair are assumptions, not measured consumption, and HS 350691 prices are customs averages. The last column compares the middle case with Vietnam’s implied 2024 export value of $14.68 per pair, calculated from $23.24 billion of exports and 1,583 million pairs (a mix of two sources).
| Assumed adhesive per pair | At $2.15/kg (Cambodia) | At $2.85/kg (five-market average) | At $3.78/kg (Philippines) | Share of Vietnam export value per pair, at average |
|---|---|---|---|---|
| 10 g | $0.022 | $0.029 | $0.038 | 0.19% |
| 20 g | $0.043 | $0.057 | $0.076 | 0.39% |
| 40 g | $0.086 | $0.114 | $0.151 | 0.78% |
Even at 40 g and the highest price, the adhesive is about one percent of the implied export value per pair. That is why a bond failure, which can mean scrap, rework or a returned order, costs far more than the adhesive itself. The matrix does not include primers, cleaners or application losses.
Country Opportunity Map
The four cases below show where the evidence is strongest and where definitions limit it. The full records are in the Dataset Explorer.
Vietnam
LARGEST EXPORT BASE
Vietnam exported 1,583 million pairs in 2024 (10.7% of world volume) and reported $23.24 billion of footwear exports, rising to above $24 billion in 2025. LEFASO describes about 1.3 billion pairs of annual production, which is lower than the APICCAPS export volume, so the sources use different definitions or scope. Vietnam’s HS 350691 import data are for 2023: $225.15 million on 49.26 million kg, or $4.57 per kg. Every partner in that table has the same $4.57 unit value, which suggests estimated quantities, so treat the figure with caution.
Indonesia
LARGE WORKFORCE, LARGEST 2024 IMPORTER OF THE FIVE
Indonesia exported 601 million pairs (4.1%) and has around 960,000 direct footwear workers, according to ILO. Its 2024 imports of HS 350691 were $111.74 million on 42.00 million kg at $2.66 per kg. Relative to exports, that is about $0.19 of adhesive imports per exported pair, an upper bound because the code serves other industries (NextMSC calculation).
Cambodia
EXPANDING EXPORT SECTOR, BROAD DATA
Cambodia exported 207 million pairs (1.4%). Its garment, footwear and travel goods exports reached $15.7 billion in 2025, but garments account for over 70% of the category, so the figure is not footwear demand. HS 350691 imports were $16.95 million at the region’s lowest unit value of $2.15 per kg, with 78.9% of value from China.
Thailand, Malaysia and the Philippines
REGIONAL SOURCING NETWORKS
Thailand imported $79.13 million at $2.67 per kg, Malaysia $89.50 million at $3.16 and the Philippines $42.23 million at $3.78. The data show material adhesive trade in the broad category, but not footwear-specific demand.
Supplier Evaluation Checklist
Five questions help a supplier or buyer read any footwear adhesive opportunity. Each pairs the question with the evidence to collect.
| Question | What to collect | Why it matters |
|---|---|---|
| Which constructions? | Substrate pairs, process and bonding steps | No single chemistry fits all material combinations |
| What is the true adhesive cost? | Grams per pair, price per kg, rework and scrap rates | The adhesive is about 1% of export value per pair in the matrix |
| Which compliance targets apply? | Brand restricted-substance lists, VOC data per pair | EU Ecolabel sets 18 g VOC per pair on average |
| Who supplies today? | Origin, landed cost, lead time | China supplies over half of imports by value in three markets |
| What service is needed? | Trial support, training, batch consistency | Changing adhesives needs line trials and customer approval |
Methodology and Data Limitations
This analysis combines association statistics, national and international organisation data, World Bank WITS customs data and vendor and regulatory documents. It is not procurement or investment advice and does not size the footwear adhesive market.
Methodology
- Each figure was checked against the original page or document for this edition.
- All amounts are in US dollars as published, and no currency conversion is applied.
- Unit value is import value divided by reported quantity; the five-market average is combined value divided by combined quantity.
- Percentages, per-pair values, supplier shares and the sensitivity matrix are NextMSC calculations on the cited inputs and are labelled as such.
Data Limitations
- HS 350691 is a broad category that includes adhesives used outside footwear, and customs unit values are not supplier quotations.
- WITS shows the quantity in kilograms without stating net or gross weight.
- Vietnam’s row is for 2023 and its partner unit values are identical, which suggests estimated quantities; it is excluded from the 2024 average.
- Vietnam’s LEFASO production figure and APICCAPS export volume differ in definition, so they should not be reconciled directly.
- Cambodia’s export figure covers garments, footwear and travel goods; sources report $15.5 billion and $15.7 billion for 2025.
- The ILO article gives no reference year for Indonesia’s workforce, and Henkel’s productivity and emission claims are vendor statements.
- The EU Ecolabel VOC limit is voluntary, covers all VOC sources and was confirmed from the Commission’s factsheet rather than the consolidated legal text.
- The sensitivity matrix uses assumed grams per pair and no measured consumption.
Source: APICCAPS, World Bank WITS, Vietnam government and industry sources, ILO, Better Work, the European Commission and Henkel and NextMSC analysis.
nextmsc.com/industry-deep-dive/specialty-adhesives-footwear-southeast-asia-2026
Key Findings
Asia is the manufacturing centre
APICCAPS reports Asia at 88% of 23.9 billion pairs produced in 2024 and 85.1% of export volume.
Import prices span about $2 to $4.6 per kg
HS 350691 unit values run from $2.15 in Cambodia to $3.78 in the Philippines in 2024, with a $2.85 weighted average.
China is the main origin
China supplies 78.9% of Cambodia’s, 54.8% of Vietnam’s and 51.2% of Malaysia’s adhesive imports by value.
Adhesive is a small cost per pair
At an assumed 20 g per pair and the average price, adhesive is about $0.057 per pair, or 0.4% of Vietnam’s implied export value.
VOC limits point to lower-emission systems
The EU Ecolabel sets 18 g VOC per pair on average, valid until 31 December 2028, covering all VOC sources.
Market size is not established
Public customs data do not isolate shoe-grade adhesives, so this page does not assert a footwear adhesive market size or CAGR.
Dataset Explorer
Filter the full 74-record dataset compiled for this report: global output and trade, country indicators, HS 350691 import values and unit values, supplier origin, compliance references and cost illustrations. Derived values are labelled as NextMSC calculations or illustrations. Export the filtered records to CSV.
| Category | Item | Value / Change | Date |
|---|
Conclusion
Southeast Asia’s footwear factories sit inside the world’s dominant manufacturing region, and every pair depends on a bond line that costs little but must not fail. The public evidence supports that logic: Asia’s 88% production share, large export volumes in Vietnam and Indonesia, a region-wide adhesive import trade priced at roughly $2 to $4.6 per kg and growing compliance attention to VOC use.
It does not support a precise footwear adhesive market size. Customs codes are broad, Vietnam’s price row is old and possibly estimated, and adhesive intensity per pair is not published. NextMSC’s framework of output, intensity, price and service is a starting point for sizing a supplier’s addressable market with factory-level data. The opportunity lies with suppliers that can prove their formulations on the factory floor and turn better bonding into measurable durability, productivity and compliance. This page will be refreshed as new trade and compliance data are published.
Data cut-off: November 17, 2026 • Corrections and source challenges: Contact NMSC Research.